Kyocera Mita FS 1200N Laser Printer "switching trays" Questions

why is my Epson WF7620 showing" cassette 1 insert correctly" I have an error with my printer as above.I have tried reinserting the cassette and reducing paper plus increase levels without success. The

my 7222 copier will not start it is showing f-77-2 M7 (Elevator motor) drive abnormality ? While the elevate tray is going up, the PWB-F (Elevate tray top face sensor) is not turned OFF in the ...

My aficio 2035e shows sc 329 and sc 322. what does this mean? Remove paper from all output trays. Depending upon the options fitted to your device, the output trays are: Internal Tray 1 (basic ...

...switching mode, the system automatically switches over to the second tray (if it is empty) when one tray is full (applies to the dual stacker only). • If only one tray was selected or if both output ...

Our imagerunner 5000 doesnt recognize full tray 1 or full tray 2, we have to use tray 3....what causes this? all trays are full of paper, but it only recognizes tray 3 I don't know if this may be ...

Printer Trays We have a T632 printer with 2 trays. The help menu only shows paper setting for Tray 1 that contains letter size paper. When we have a document requesting legal paper medium, we hear a ...

error code a06-403 Error code a06-403 check the paper tray area. if the machine was recently moved, make sure the plate under feed tray isnt bent. there are safety switches above and below paper tray,

...trays as follows: Tray 1 - A4 Plain Tray 2 - A4 Colour (Fax Paper) Tray 3 - A4 Letterhead Tray 4 - A3 Plain I have also changed the settings so that when a particular tray finished (i.e. Tray 1 has ...

...switching in hp laserjet 4100 Okay, do you mean "Tray Linking". The process where, for example, if Tray1 goes to an empty condition, tray2 so the print job runs uninterrupted? Or do you mean that you ...

Tray 1 is full on my Sharp AL-1642CS but when it ties to print to tray 1 the 'P' keeps flashing! Tray 1 is full on my Sharp AL-1642CS but when it ties to print to tray 1 the 'P' keeps flashing and won