...board (KP-5063), and the continuity across the connector terminals. Repair or replace if necessary. These are direct from the Tech man. More than likely it is the Exposure Lamp. Hope this
Question about Kyocera Mita Office Equipment & Supplies
...lamp or inverter PWB. 3.Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position sensor. 4.Check the connection of connector YC7 on the ...
Question about Kyocera Mita Office Equipment & Supplies
...and clean (windex or similar is fine for all of this) Slide scanner to the right and clean mirrors, lamp, and reflectors Then remove black lens cover (I believe 2 screws on front and 2 on back) - A ...
82 questions posted
Usually answered in minutes!
180 Questions
128 Questions
77 Questions
66 Questions
63 Questions