CTX Optoma EzPro 600 Multimedia Projector "fuse" Questions

fuse reemplacement Hello!Why do you want to replace fuse? Is your projector dead? In many cases just a fuse replacement will not solve the problem. if fuse is blown, good chance, that power supply has

...clues The first generation of the IN72 / IN74 / IN76 projectors had a power supply problem where a fuse on the P/S was under-rated. The 1amp fuse was subsequently replaced with a 2.5amp fuse to ...

no power taken cover off, is there a fuse or reset button. Could be both ,there is 1 1.4 amp fuse for 220v or 3.3 amp fuse for 110 volt model.Fuse should be visible,some came with what looks like a ...

how do you know if you blow a fuse? i replaced my bulb and when i plugged back in i got a bit of a spark at the plug recepticle and now i get nothing... any ideas? Well if you have blown a ...

NEC VT670 Blown Fuse I have a NEC VT-670 and has a slow blown fuse burnt. I replaced 2 times, but still blowing the fuses even while I checked the cables to see if a hot wire was grounding, but found ...

no power try checking the fuse coming into the machine, should be near the power cord entry, unplug first! put a multimeter on ohms across the glass/ceramic fuse, should read 0.0 or 0.1 ohms. if ...

optoma h79 wont power up is there a fuse to replace if so where is it thanks hi,      All electronic equipments have fuse in the power supply section. In your projector it is&

How can I change the power supply or fuse on projector? Projector no power remove the top, front and rear panels (4 copper screws and 4 silver screws on bottom, 2 silver on back). there are 2 fuses ...

no power on Compaq MP2800 Microportable Projector is there a fuse inside my projector I am currently struggling with this issue. There is an easily-accessed fuse inside the projector. I was very ...

NO power, no lights, possibly there was a flash before it went of fuse in plug OK Lead seems OK Please can someone tell me how to check or replace the internal fuse or what else can I try Bulb seems ...