...alarm flashing and it is saying ink absorber is full. Please help me if u can................ Thanks...............Shari make sure printer connect to power source/cable power then press power button ...
...STOP/RESET is pressed, the alarm LED and COPY lights alternately starting with alarm LED). When the COPY button lights in green, press STOP/RESET button 4 times. (Each time STOP/RESET is pressed, the ...
Stop button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) Without the scanner (connect the operation panel unit.); While holding
Question about Canon PIXMA Office Equipment & Supplies
...STOP button for a few moments. The alarm will be released and then you let go of the button. Printing can resume. This happened to me where the alarm was triggered by the cyan ...
alarm how do I clear the alarm 1. Press ON/OFF switch to reset the multifunction device 2. Press Stop/Reset and ON/OFF to reset the printer 3. The MP530 may require repair
Question about Canon PIXMA Office Equipment & Supplies
...Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) 4) When the Power LED lights in green (and "Service Mode Idle" ...
alarm light flashes red.Thats it.Nothing after that.Doesnt work reset/stop or any other key. Please help me to find solution. Thank you unplug power cord from printer's back, wait a few minutes , plug
...Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED 4) When the Power LED lights in green (and "ServiceMode Idle" is ...
...Stop/Reset button 4 times. If this does not work you need to call canon. Good Luck Hi, Your error means the waste ink pads are full, its recommended you get them replaced but they should hold out for ...
Question about Canon PIXMA Office Equipment & Supplies
...to print but there is no paper jam the 'alarm' light is on and the E is flashing Power up printer,then press & hold (STOP/RESET)button for 5 sec. Then restart printer.I think it fix your
391 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions