...data, they might be IMAGES of text, and saved in a format the printer/buffer does not support. Any of these examples would allow the software to DISPLAY the specific (missing) lines of text -yet NOT ...
...data decoder error Try to clear code. enter sim with program key- asterisk*-clear key- asterisk*(P-*-C-*) enter sim 14 print key execute yes clear all machine will reset. if code comes back it is not ...
Question about Sharp Office Equipment & Supplies
...Key]: Main code input [Note] Codes are entered in the ring format. [PRINT]: Sets entered data. [C]: Clears entered data. [CA]: Terminates simulation. [Others]: Cancels (ignores) entered data. 4 If a ...
...key. The fusing problem data is initialized. (Four service calls, namely C6000, C6020, C6050, and C6400 are reset.) Completion Press the back key. The indication for selecting a maintenance item No. ...
Question about Office Equipment & Supplies
the indication to a zero. 4. Press the start/print key to enter the new data. 5. Power the machine OFF then ON to exit the 25 mode. If the code comes back then your fusing unit will need parts/service
...data by Simulation 22 sub 6. This is how to : 1) #/P key (program) ON → Asterisk (*) key ON → CLEAR key ON → Asterisk (*) key ON → Ready for input of a main code of simulation ...
...0 0 Stop 0 1 The Service mode menu screen will appear. Select the 11. CLEAR DATA MAINTENANCE COUNTER Select the setting value using the 10-Key Pad. Validate the selection by pressing the [Yes]
Question about Canon PIXMA Office Equipment & Supplies
data is the drum correction values (the drum getting old have to be ajusted from time to time) but betwin that and having a dead machine... Your choice. You can find the service mode codes in the net,
...data abnormality Check and remedy Check connection of the connector and the harness between the IMC PWB and the MCU PWB. Check the ROM of the IMC PWB. Perform the following procedure to enter the ...
the start/print key to inter the new data.Power the machine OFF the ON to exit the 25 mode.If the F code reoccurs after powering up the copier will need either a lamp or thermal fuse in the fuser unit
614 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions