Question about HP PhotoSmart Office Equipment & Supplies
...print setup This problem occur when ink head is dirty and also the head cleaning plastic mechanical cleaner is full of jammed color. 3210 model can be opened and the ink head plastic cleaner can be ...
...out. Just plug the unit and POWER it ON. When the print heads move, pull out the power cord from the wall outlet to abruptly turn it OFF. Now you can freely more the heads and pull out the
Question about HP PhotoSmart Office Equipment & Supplies
move it completely to the right hand home position just simply away from the obvious jam. 3) With a flashlight and tweezers try to locate paper jam in the print head track. Best to also blow out paper
...move sideways and see that the liquid is colored black. repeat the procedure several times, add more liquid and allow it enough time. remove the cardboard, allow to dry, turn the printer and run a ...
...move the print head carriage by hand. Look to the right where the head carriage is normally parked and you should see the pump cap area. It will be a black looking spongy pad covered in ink. Now take ...
will get sticky and the pad may stick to and wind around a shaft just above it. To check, move the print heads to the left to expose the bottom of the well it is located in and carefully clear the jam
...& print-head mechanism across the page. If it is 'jammed", then it is not moving when/where the printer is commanding it to move. Take the printer to a qualified technician, for
...the print carriage that slides back and forth. If this has moved it will foul the print head. I moved mine back into the right place and the print head now moves freely. Hope this helps, Cheers,
Question about HP PhotoSmart Office Equipment & Supplies
...in your printer that may cause your print head to not move perfectly. if all clean move the print head to the center, now re plug the power cord and turn back on your printer, reply if still the
Question about HP PhotoSmart Office Equipment & Supplies
...print yellow light power down with cover lid open or closed ends with same result have tried removing and reseating both cartridges yes i have removed the protective tape fromthe new cartridge! try ...
146 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions