Question about Heating & Cooling
...to off position check wires from thermopile to stat and gas valve for damage etc . Thermopile has to warm up and make 600 mille volts to work . Try this then open stat and see if it fires up
Question about Lite On Heating & Cooling
valve...touch the 2 thermopile leads direct t TH and PP on valve to bypass limit and stat...if it works direct...then a limit or stat is open I als can't get the burner to ignite is there a diagram of
Question about Heating & Cooling
...Any help on this would be greatly appreciated. -Chad Hi try national energy they should be able to tell you the right valve for this , the thermopile should read between 500 and 300 mille ...
...thermopile rather than a thermocouple and it will not allow the gas valve to open if not enough voltage is being sent to the gas valve. Hopefully your gas valve is working properly and will not need ...
...thermopile tubing to locate any inline sensors that may be open, preventing the signal reaching the gas valve. Let me know if I can help more. I have not been able to find any information on this ...
...valve, no wires. So, find out which one you have. The thermopile generator will have a much larger bulb on the end. About Thumb size. The other about smaller then a pencil. If you have the thermopile ...
...sure the wire connections on the valve are good and tight. If all good, culprit is the thermocouple or pilot generator also called a thermopile. Different style and names, all have the same
Question about Heating & Cooling
...thermopile that conrols the wall swith is bad or the swith itself. If you can jump it (bypassing the switch) and it operates correctly, then yes. It is either the switch, the wires leading to the ...
...valve to shut down. Not sure if this model has both a thermocouple and thermopile check pilot light to make sure properly in place with thermocouple check gas feed for proper pressure and new doesnt ...
...and make sure it is screwed into valve properly (do not over tighten). If the pilot still doesn't go change the thermopile and if that don't work change the valve, but it most likely the ...
34 questions posted
Usually answered in minutes!
148 Questions
64 Questions
59 Questions
57 Questions
11 Questions