Infinity RS-8 Speaker "crossover repair" Questions

crossover / board replacement--- any thoughts or suggested repair options? The company has been horrific. Love the speakers, but the company doesn't s The tweeters both blew at the same - the amps

crossover divides the full range signal to hi and low, it will be made up of colis and capacitors with some soldered joints, there may be a faults with this. If it is a loose connection / dry joint it

where can I get a set of crossovers for the Bose 601 series III Can someone please help me find a set of crossovers for the Bose 601 series iii. thx Bose don't sell a lot and indoubt you can order ...

crossover broken? Hi have these speakers too and both crossovers in the bottom (sub) piece is not working. You may want to remove the amp assembly (8 screws?) and check the fuses before you send it in

My infinity overture 3 crossover does not work anymore (both sides of the crossover do not have any output. If I bypass it the speakers do work (obviously without the filtering) My question is how do ...

...repair man). Specifically, the crossover circuit does not "fire" to trigger the output of sound in the proper spectrum. I know that the speaker is fine (I checked it with a separate sound source). So ...

Cerwin Vega D9-E Speakers. Bad crossovers...I think. Fixable? Got some new CV's with issues. Bought them used, and crossovers appear to be bad. Probably got a bit overcooked by previous owner. Are the

Damaged JBL Eon15 Tweeter Can anyone tell me where I can buy a new crossover motherboard for my JBL Eon 15. My tweeter has blown and I don't seem to able to find anywhere that does repairs. Help ...

...have same speaker but it is used/second hand and have had some repairing work done on it. It's crossover also had some manipulating. Now this speaker doesn't perform very well so I need ...

...repair? Or is it simpler to replace the amplifier? You may have only messed up the crossover circuit. Try changing the crossover frequency and see if hte behavior changes. If so, then the parts cost ...