Sony XSLD106P5 Car Speaker "wire dual voice coil" Questions

wire it up my brother gave me a 12" dual coil. it has nothing but the name in the speaker part. can,t get it to work. need wiring diagram for the speaker. each coil has two slots each for pos and neg.

...wire up a dual voice coil lanzar 15 for 4 ohm? Hello dexterchapma, The only way to wire a single 4ohm DVC sub to present a 4ohm load is to just connect one voice coil. If you wire the coils in ...

wire it in "parallel". This will make a 1-ohm total load. amp pos. out to coil 1 pos. to coil 2 pos. amp neg. out to coil 1 neg. to coil 2 neg. If the they are dual 4-ohm, the rating would be 2-ohm in

...wire goes where on these speakers there are four place for wires two pos. and two neg. why is that? Hi they are dual voice coils so there is a positive and a negative for each coil its like two ...

...wire up your coils depends on the amplifier you are using. THe Alphasonik 800 series sub's are Dual 2 ohm woofers. so you can run one singe sub @ 4 ohm's or 1 ohm. If you have a pair you will be ...

...dual voice coil wiring. Option 1 (parallel/parallel) = 1 ohm load Voice coils wired in parallel, speakers wired in parallel Recommended Amplifier: Stable at 1 ohm mono Option 2 (series/parallel) = 4 ...

...dual 4 ohm voice coils, they can be wired to a final load of 1 ohm. Wire the voice coils in parallel and then parallel both subs. Like the diagram in Wiring Option #1 shown here. ...

Hi,I like to wire up my sub-box to a 10'' pioneer dual 4 ohm voice coils.What gauge wires should i use.Thanks 12 or 13. make sure toy have a fuseable link for your amp

wire it to 4ohms? That sub has dual 4-ohm voice coils. It can be wired either as 2-ohm, 4-ohm, or as 8-ohm. 2-ohm = voice coils in parallel (both positives and both negatives connected to your speaker

...wire mtx 9500 subs 2 10'' down to a one ohm THE T9510-04 SUBS ARE SINGLE COIL SUBS AND YOU CAN VIEW THAT WIRING DIAGRAM AT THE FOLLOWING LINK: ...