Question about Fellowes Office Equipment & Supplies
...the collection bin. Pull as much stuck material as possible from the top and bottom of the shredder blades with pliers or use canned air and blow the edges of the blades. 2 Place the paper shredder ...
Question about Royal Office Equipment & Supplies
...own a Royal RL170MX shredder. I turn on the shredder, put the paper in. The shredder turns on, the blades rotate, but the shredder does not **** the paper in to the shredder. please advise. If the ...
Question about Fellowes Office Equipment & Supplies
Our C220c shredder does not shred, motor turns and blades turn but i think the blades are blunt. Can you get new ones or have the old blades sharpened? There are 2 shafts that have the cutting blades ...
shredder blades not turning A staple or paper clip has jammed the cutter blades. If there is a reverse switch then reverse to free the cutter blades and remove these objects.
Question about Office Equipment & Supplies
Center cutting blades are all bent up and broken/ The center part of the cutting blades are all broken, can I buy the cutting blades and replace it? Where would I find them? Probably have to go to the
Question about Office Depot Office Equipment & Supplies
blades all bent and paper still twisted on them. I put some oil in for the blades and then the paper got wet and curled around the blades twising them. I need a whole new set of blades for my DQ120DN.
...gently rotate the cooling fan blade on the end of the motor, whilst looking at the shredder blades. you should see the blades moving very slowly. make sure the blades are rotating upwards, to ...
Question about Royal Office Equipment & Supplies
the motor will hum when you put the paper to the blades but it will not shredd because the blades do not turn. The motor hums when the paper is next to the blades but the blades do not turn . Model # ...
Question about Fellowes Office Equipment & Supplies
od700c shredder: motor spinds, blades don't move I have a Fellowes OD700C shredder. The motor spins but the blades don't move. I can unplug and jiggle the blades a little, plug it back in, and the ...
Question about Shredder Office Equipment & Supplies
My shredder will not work. It makes sounds both forward and reverse, but the blades don't; turn. There's no jam signal. Help!! I know I put something too thick through it and I have cleared out all ...
120 questions posted
Usually answered in minutes!
61 Questions
52 Questions
31 Questions
23 Questions
16 Questions
