Lite On Laars Lite 2 Heaters: 250,000BTU MV Heater "pilot light seems high" Questions

Pilot light seems to high The pilot light on my Ml300EHBC seems to run to high. It flickers and and has a very distinct pressure sound to it. FLickers mostly blue to a little orange and seems to be ...

pilot light to ignite on my wall heater which is propane. It's a brand new tank recently filled. When the pilot was on, it seemed weak and when I turned the burner on, the flame was weak on the burner

...pilot and burner. Seems like the gass pressure may be too high, would this tell the valve to shut down the pilot when heat is called for? No, that would just cause you to have huge flame. There is ...

...pilot light will light but when i turn it to the high pos the pilot light goes out every time unless you blow on the thermocoupler. " at least thats what seems to work" and then it will go out after ...

...pilot light is blown out when burners shut off Teledyne -Laars boiler pilot is blown out when burners shut off. This seems to only happen when all of the burners dont light up completely. It is as if ...

...generator, and are sure that's not the problem, then it may be the pilot solenoid on the main gas valve. How do you adjust a pilot light on a Gas Fireplace. The Pilot Light is at least 5 inches

...light the pilot light (manually) but when the controller tells it to flame up nothing happens - i.e the burners don't light - they don't seem to have any gas going to them. test thermosat for proper ...

pilot burns in a Y-shape in order to feed both sides. Thanks a million, Scot The insert sounds like the cap covering the adjustment screw. Pin hole is for cap removal. Wondering why flame is so high?!

...Pilot works as expected and burners seem to light and hold as expected. With a standing pilot I set the temperature dial and the ignition jet sends gas down ignition tube toward the pilot, flame ...

pilot light keeps blowing out. When I do get it working it only works for a little while and the pilot light goes out again. It seems like there is to much presure. I have regular 5 gal propane bottle