Lite On Laars Lite 2 Heaters: 250,000BTU MV Heater "pilot light lit burners ignite" Questions

...pilot light will only stay lit when you hold the pilot reset button in, as soon as you let the button out the pilot light goes out and the actual burners never come on. Any ideas? Gas line is clogged ...

...pilot light then there is no igniter. after the pilot is lit did you turn the valve back to the on position.is the blower door on right. to check power put the tstat fan setting to on,if blower turns ...

...pilot light stays lit but when you turn control valve on it stays lit for 5 seconds and then shuts right down,even the pilot light goes out.I have tried venting the room and everything.What is the ...

...light its pilot with a spark then the pilot proves its on ... Troubleshoot an ignition problem on a Lennox gasfurnace .... Pilot and no inducer but is the same model as that great video! ... You ...

...lit and the pilot ignitor keeps sparking continuously for several minutes with the pilot flame lit. Then eventually the ingitor turns off and pilot goes out. Main blower shuts off after a while. ...

...Pilot won't light - natural gas or propane. check for a spider web in the burner tube. check no dust in burner tube. check surface igniter is lit. if pilot lights check flame detector - may be a ...

...pilot light ignite? If not you probably have a bad igniter. If pilot lit....in a little bit you hear a click of the gas valve opening..then the main burners will ignite If you see the pilot and the ...

...pilot light stays lit but the burners will not ignite You need to check a couple of things, first is the flame sensor, second is the thermostat. Without anymore detailed info this is the most I can ...

pilot light wont stay lit when I release the ignite button the pilot light goes out You need to replace the pilot safety switch which is usually a Thermocouple. It is connected by a thin tube from the

...Pilot light will light and stays lit, but when I Empire DV-210 (w/thermostat): The pilot light seems to work fine. It lights and stays lit, but when I try to ignite the main burner, it will light but ...