...plug the power port directly into the bottom of the MyFi (battery stays removed). Wait 10 seconds and listen for a beep. After you hear the beep the message "insert battery" will appear. Cycle the ...
...power, otherwise none and the connector pops out. still connects to the car plug connector. I had the same thing happen on my original Roady2. I suspect the powerplug port on the Roady2 unit is not ...
...power adapter directly into the bottom of the receiver (not through the cradle). Push the adapter plug toward the back of the receiver to see if the + sign on the battery on the top right of the ...
Question about Clarion Audio Players & Recorders
...power cord won't plug into the radio anymore, because the place where the plug goes has become loose and has disconnected. In order to fix it, the radio has to be opened, but I'm not sure how to get ...
Question about Delphi Audio Players & Recorders
SKYFI3 WON'T TURN ON, PLUGGED INTO CAR AND WON'T TURN ON. PLUGGED INTO CELL CHARGER AND IT'S NOT FLASHING ON AND OFF You need a special 5 volt 2 amp power supply for the unit, you cannot use your ...
Delph Skfi3 won't power up now matter what docking station it is plugged into. Is the internal battery accessable? No, internal battery is NOT accessible. Leave it plugged for about 4 hours until it ...
...plug in the power cord into other car outlets and nothing works. The cord and the unit do not seem to be damaged in any way. Help You blew a fuse in the car plug. Unscrew the top of the car charger ...
Question about Delphi Audio Players & Recorders
...power supply was not correct for the Roady XT, but a little surgery put the new plug on the old supply... (verified by a volt meter). When I plugged it in the Roady quickly turned on and showed full ...
...power plug has to be rotated just right for the unit to power up. Slightest movement of power cord and it shuts off. I checked the cord and it shows 6v, I assume it's the connection between cord and ...
Question about Delphi Audio Players & Recorders
from the base and plug the power cable directly into the bottom of the SkyFi radio - you should be able to power up with it plugged in directly, even without any battery. Give it a try and let me know
75 questions posted
Usually answered in minutes!
148 Questions
105 Questions
43 Questions
25 Questions