Question about NEC Office Equipment & Supplies
...power light stays orange and the status light becomes green. The lamp light stays off though (no red, no orange, no green). At this point the fans haven't turned on and the lamp isn't ...
power light blinks and the status light is off, check the lamp door. if the power light blinks and the status light is steady red or blinking green, you have a power supply/ballast issue. you may have
Question about Mitsubishi Office Equipment & Supplies
...power light is ON and status light is OFF; check if any objects are blocking the air inlet or outlet grill, and remove them if any, and carry out the following.[1] Unplug the power cord from ...
...power and status go green. Power light then goes out, status keeps flashing green for about 20 seconds. Power light then comes on green again and status turns amber, unit shuts off. Tried the ...
power light flashin orange, status light flashing red on WT610 NEC if the status light is flashing .5 seconds on and 2.5 seconds off - you need to replace the lamp cover correctly. if the status light
Question about NEC Office Equipment & Supplies
...power button the status light goes on and when i take my finger out the stutas light turn off it seems the lamp is failing ,the price of the lamp is USD130 any questions, feel free to contact me have ...
5 second of interval Sometimes the fan overheats. Pull the power plug out of the back for about 15 - 20 minutes. Then plug it back in. 95% of the time that will solve the blinking status light problem
Question about Mitsubishi Office Equipment & Supplies
Power and status lights seem to be blinking a code that is not in the manual. status light blinks 4 green to 1 red, while the power light blinks 1 green to 1 red. Lamp cover?
Question about NEC Office Equipment & Supplies
...replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then beeps about 3 times then turns to a flashing red. Help you need to reset the lamp ...
power -- status light still blinks seven times, I just can't get the projector to power up the bulb. the lamp timer is failing lamp timer chip is on the lamp housing,is a little chip you need to reset
24 questions posted
Usually answered in minutes!
21 Questions
23 Questions
30 Questions
27 Questions
22 Questions
