Mitsubishi XD480U Multimedia Projector "lamp hours" Questions

my lamp light is yellow green? what could be the cause? hi , Do one thing just reset the lamp hour of your projector. For resetting the lamp hour do the following. While simultaneously holding down ...

...lamp hours. It is surprisingly easy.Hold UP on the projector until the lamp hours appear. Then press left or right to reset. This took me a while to find! But it's in the service manual. problem ...

...lamp hours is stored in an EEPROM chip built into the lamp. As soon as you put in a new lamp (MT60LP or MT60LPS), the hours will be reset. If you remove and put back in an old lamp, the unit will see ...

...lamp hours (hold down left " VOLUME - " button, followed by pressing menu button for 5 - 10 seconds). However, neither of the good lamps work in the first projector. A while after turning power on, ...

...reseted without changing the lamp. Thanks the lamps are good for about 2000 hours. but it sounds like it's time to get a new lamp. but after you put it in, go into the menu and reset the lamp

how to reset lamp hours lt265 nec Select the Menu [Reset] â?? [Clear Lamp Hour Meter] to clear the Remaining Lamp Time and the Lamp Hour Meter

...lamp hours can only be displayed by connecting two test points in side the projector. in normal operation, a message will be displayed on the screen when the lamp hours = 1090. when the lamp reaches ...

will not coming on ,standby light is orange temp and lamp light not on hi, Just try to reset the lamp hour of your projector. For resetting the projector do the following. While simultaneously holding

...Lamp Hours: 2000 Hours Model: CP-X1250 ( Lamp) Part#: DT00601 Lamp Type: UHB Wattage: 310 Watts Lamp Hours: 2000 Hours I'm not sure but I would think the same ballast board is used, and the trimpots ...

...issue with the projector? if any one could help that would be great, thanks, hi, Did you rest the lamp hour after replacing the lamp. It is recommended the you have to reset the lamp hour after ...