nec vt540 vt540k I have a nec vt540k and it stop projecting images. When i turn it the power led turned in solid green, the fan start working withouth problem but in few seconds the status led turned ...
...the timer. I have put in a new lamp and reset the timer. Still--after initial power on, the power led goes green and the lamp led goes green; then the power led goes red and the lamp led flashes ...
...which I Hi Ajin, I have a LG RD-JT52 Projector which I would like to replace the lamp with a LED. You might think this would not be possible - but I have acquired a 4000 lumens 170W LED which
Hello. My Nec LT35 projector will not turn on. From standby mode, I hit the power button, the power LED turns green, the fan starts, but after two seconds it switches back to standby. The ...
Question about Planar Office Equipment & Supplies
Planar PR3010 turns on (steady orange Ready LED & steady green Power LED), but there is no light coming from the bulb Planar PR3010 turns on (steady orange Ready LED & steady green Power LED), but
...projector just cut out. Now when i try and turn the projector on the the fans start up and the lamp led dims whilst the power led stays green, after about 10 seconds or so the power (green) led turns ...
Question about InFocus Office Equipment & Supplies
Infocus lamp replaced - still does not work. LED lights on control panel not on either. without knowing the model of projector, i would say that you need to replace the power supply. the leds are lit ...
when projector is put ON, I think the circuit board is having problem. When I power it ON the power led comes ON. Then when i press the start button the Status led comes ON the after a few seconds the
Question about Mitsubishi Office Equipment & Supplies
after initial power on power led and status led turns green for a while, after some seconds lamp status starts blinking green, then turns off and power led turns red. solve the problem. Does the lamp ...
Question about Sanyo Office Equipment & Supplies
No Light from projector (worked previously) Ready and Lamp LEDs on with power connected. Push On/Off button and fan turns on Lamp LED dims but after a few seconds hear a relay switch and Lamp LED goes
15 questions posted
Usually answered in minutes!
21 Questions
23 Questions
30 Questions
27 Questions
15 Questions