What size Torx screwdriver do I need to fix a Dyson DC35? There is a clog in the neck part of the vacuum head. There are 4 Torx screws but I don't know what size Torx screwdriver to use. Any help ...
...from the steam cleaner to fit a replacement wheel. The screws holding the casing are similar to torx but they have a raised centre which means they can't accommodate a torx screwdriver. I ...
Question about Oreck Vacuums
So I can remove the motor and purchase the correct driver, what type and size torx screw does it use? Fran, If I remember correctly, I believe you need a #20 Torx bit to remove and re-install those ...
...off in order to remove the hose. Those screws that look like they cannot be removed are probably torx screws which need a T20 torx scredriver that you can get at any hardware store. That is the ...
Question about Vacuums
Thanks to gbob59 for your response to my last question. I think the screw is a torx type screw & needs a special tool. Can anyone help me with the size of the tool? You can buy a torx bit set fairly ...
...on the vacuum in order to replace the wiring connected to the on and off switch? You will need a Torx bit or screwdriver with a torx head on it. That will remove the motor cover. The top cover ...
...power cable of a kirby ? Thanks gs You'll need three types of screwdrivers. A straight edge, and 2 Torx, sizes 15 and 20. With the vacuum in an upright position, remove cord from holder. Use the #15 ...
Torx Screws Where are the torx screws located to open the body of the dyson dc35 handheld vacumm? Hi Laurie, it's Jack at Dyson. We'd advise against dismantling your DC35 any further than is shown in ...
Question about Eureka Vacuums
...on Eureka Atlantis.No water spray. Is this an electrical switch or a mechanical switch? Silly Torx screws a pain to remove. should be mechanical, torx screws are easy to remove with a torx
87 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
597 Questions