Optoma EP719 XGA DLP PROJECTOR 2000L 2500:1 CONT DVI-D WITH HDCP Multimedia Projector "not light" Questions

...not sure. I plug it in, the ready light comes on. I turn it on, and the green light turns on. The fan kicks on, the bulb doesn't light up. After a five seconds, the green light turns yellow for 1-2 ...

...if the main lamp fails to light? Does the main lamp light at all? It sounds light a cooling fan failure. If the fan iis not working the the main lamp will not turn on and the power light will

light does not turn green lights come on fan Light does not turn on, green lights come on fan surges, then green light blinks... Try another blub and check to make sure the cover for the blub is on ...

...light was not coming on. When I put it in for repairs it turned out to be the lamp that needed replacing. The technician said it is not uncomman for the lamp to be gone and the lamp warning light not ...

...light tunnel is not a expensive part to have replaced and it is better to do it than to keep on buying new lamps. You can easily find your nearest Authorised Service Dept online. Tip : Don't let just ...

...light. All are steady (not blinking). I have replaced the lamp light housing. No changes. It will not power on at all. press the help button on remote for 8 to10 second contineos for reset ...

not power on if the power light blinks and the status light is off, check the lamp door. if the power light blinks and the status light is steady red or blinking green, you have a power supply/ballast

...Power light, which is not one of the light combinations documented in the manual. light source bulb bad ?? there is a sensor inside that detects if bulb is broken and wont allow to come on ...

...to be replaced by a tech. Save you old lamp because it is probably still good. The light tunnel being collasped is obstructing the light but also not focusing the light into the engine as

...not i just replace the lamp, and don't have any light coming from lens,starting green (after a few seconds,green become to flash), then turning on orange and lamp light flashing...please i need help, ...