Optoma EP719 XGA DLP PROJECTOR 2000L 2500:1 CONT DVI-D WITH HDCP Multimedia Projector "capacitor" Questions

...it. Thanks. [email protected] Bill The main problem is the power supply. In detail, the output capacitor of the power supply causes the problem. I guess, Toshiba or Lite ON didn't consider the ...

...fans were not working, and the bulb would not turn on. In my projector, the fan board had a bad capacitor. The fan board is the one where all 3 fans are connected, and which is facing upside down ...

...light its stady red and the status light off , push the power buton ,but won't start The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ...

This could save you a few hundred dollars, and if this doesn't help or you can't find any "popped " capacitors, then you are not out anything and you still have the oppertunity to call a professional.

... Changed the lamp replaced new one. Still it does not glow. Try this: There is a stuffed 10v 3300uf capacitor on the power board. You need to replace it. Bellow you can check in the picture where the ...

...it tries to charge the components up with electric, then somewere it hits a faulty component (capacitor) and shuts itself down (standby mode/blinking etc)...You coulv'e heard a small "pop" when ...

...it tries to charge the components up with electric, then somewere it hits a faulty component (capacitor) and shuts itself down (standby mode/blinking etc)...You coulv'e heard a small "pop" when ...

...again the green light remains on solid. Any Ideas? Thanks, Bill There is a stuffed 10v 3300uf capacitor on the power board. You need to replace it. Bellow you can check in the picture where the ...

...connected it directly to my laptop and still get nothing. Try this: There is a stuffed 10v 3300uf capacitor on the power board. You need to replace it. Bellow you can check in the picture where the ...

...smoke so I quickly turned it off. What coud be wrong and who can fix it at a reaonable cost? The capacitor that is blown wouldnot be a 150V but a 450V. Dannol, I think you should really double ...