Dyson DC28 Animal Bagless Upright Vacuum "not suction" Questions

Ad

Question about Eureka Vacuums

3 Answers

...not suction - it will spray and spin the brushes but will not suction - the power is going to the machine, but it will not suction. Disconnect the suction hose. While running, check the suction port ...

Ad

...the hose from the head and check for suction at the end of the hose. If there's not suction there, then you've got a clog or a hole. If there is suction there, then you've got a clog in then

Ad

...not receive the manual. Thanks You say it lost its suction, then you also say this is plenty of suction power, seems you cant figure out the prob. Try cleaning the fan on the suction blower. The ...

...not creating suction f so detach vacuum from piping and verify that vacuum is not the problem does any of the inlets have suction or no sustion anywhere..if they all have suction except on then thats ...

...for a few minutes and then it slowly fades until there is no suction for the hose. Thoughts? check the seal on the filter is not broken,And check for any blockage at the bottom of the pickup

...not spin and there is no suction The brush bar motor or one of the switches may be defective. If the brush is not spinning it will not pick up anything from carpet leading many to think it has no ...

...not sure about the suction issue. Any idea? There must be a clog in either the hose, dirt inland by the brush roll, or bad filters. If you have suction at the end of the hose, then look lower all the ...

Question about Riccar Vacuums

1 Answer

suction when not using the hose, however. I think you mean it's an 8955, Riccar has not had a 8995 model. If there is no suction in the hose it has to have something clogging it. Open the little round

...not come on suction motor will not come on, tested with cover off???? Used my Steam Vac twice and now there is no suction where the unit should be picking up the water layed down from the sprayer. ...

Question about Kirby Vacuums

1 Answer

...blockages in the area where the brush roll is then you need to change the belt, even if it isnt broken. putting your hand over the nozzle to feel the suction is not the way to tell if it has

Not finding what you are looking for?
Dyson DC28 Animal Bagless Upright Vacuum Logo

442 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...