...brush stopped working... I was vacuuming and the beater bar brush stopped working, so i pulled out some long hair from the cylinder and then when i turn the vacuum on the beater bar brush works for ...
I have a Bissell Pro Heat 2X carpet cleaner and the brushes spin, then stop. I turn it off and when I re-start, the brushes do not spin until I push foreward. The it spins and stops again. Both belts ...
...fix this, and were to look would be greatly appreciated. Thank you! If the roller brush as stopped spinneng .and the brush motor still works the brush belt as broken,you must replace the brush belt, ...
Brush stopped spinning I have a Dyson DC 24 and the brush stopped spinning because it was clogged. I removed all of the hair etc. and replaced the brush, but it still is not spinning. Any suggestions?
brush stop and have to reset but stops again Most likely on the edges of the brush, there's likely tons of hair and carpet wrapped on stopping the brush roller to spin. A worn or stretched belt could ...
...stopped turning. Everything else works fine. check the drum. Hair will rap around the axxel and stop the brush from turning. Cut this hair with a razor and place a small drop of oil on the end of the ...
brushes stop spinning after one minute my floormate brushes stop spinnig after running for a minute or two want causing this. Check any filters that may be clogged, try running a mix of water and ...
...stopped turning. The brush bar on my dyson animal control stopped turning. I was starting the vacuuming and the bar stopped turning. I cleaned off any strings before I started vacuuming too. I turned ...
Why does the brush stop while using on carpet? This Miele Salsa Model s7280has a button on, the handle, to select brush on (carpet) or off (floor). When using on carpet, with the brush on, the brush ...
442 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
597 Questions
