Optoma EzPro 739 Multimedia Projector "vertical lines" Questions

...thinner lines. IF THERE IS WHITE VERTICAL LINES IN YOUR PROJECTION THEN REMOVE THE MOTHER BOARD AND REFIT THE BOARD OR U CAN JUST PRESS IT FROM UPPERSIDE THE PROBLEM WILL SOLVE OUT CHINTAN.A.SHAH ...

vertical lines on DLA-G10E projector, image superimposed with constant/stable vertical lines(thin colour vertical bar all the way from top to bottom) all across screen, they change colour with image ...

VERTICAL WHITE LINES There are vertical white lines that will not go away I just read a post that said tap on the top and the line will go away. I tried it on mine and it worked! I had to tap it ...

Vertical Lines on the projector screen How can I fix this one for Infocus LP70+? When the vertical lines are displaying, open the projectors menu (by pushing the "menu" button). If the vertical lines ...

vertical line there is a green vertical line just left of centre in the display, with or without an input the LCD is not work well you can do follow these: 1,reconnect the LCD cable (It is connected ...

White vertical line on left side of screen White vertical line showed up. Took projector down and cleaned it. Started the projector again and white line was gone. Took about 5 minutes and the white ...

...vertical white lines appear on the projected image. Tapping the unit sometimes has an effect, causing one or more of the white lines to disappear. The problem resolves itself after about 15 minutes ...

...vertical lines I have a panosonic pt-l592u projector that only has 410 hrs on lamp. It is now projecting green vertical lines embeded in picture. When I pull up menu, everything is fuzzy till I ...

vertical line My projector model ep719 has vertical line on the left side of the screen. How do I fix it? Hi there The only way of fixing this is replacing or repairing the Mainboard. This is a common

Vertical lines on projected image from a Dell Data Projector. White vertical lines are appearing at even spacing across the width of the image projected. At a loss to how to fix this. Any ideas as to ...