Question about Office Equipment & Supplies
...new lamp. projector powers, on when you try to start it up,lamp indicator flashes three times. Have replaced the lamp with new. Still flashes three times Check your manuel for Lamp counter reset ...
a new lamp. lamp faliure not warming up fast enough sorry lamps exxxxxpensive red light indicates lamp is expired. even though you get temporary light, the lamp is shot. Try BULBMAN.COM for a new lamp
new lamp projector lamp shuts off after 20 minuts. where as on my old lamp it works properly. I checked new lamp in other same model projector & there it works properly. All the projector settings are
...projector detected that a new lamp is intalled, it should work fine now. but if its still not working, you might want to try and replace the new lamp again. sometimes this happens. hope this
...lamp with new one. after replaced of lamp with new one or used you must cheak the on screen image is smooth not a very very smooth but smooth no flashing no any abnormal view than lamp is faulty only ...
Question about Epson Office Equipment & Supplies
...new lamp but Replace the Lamp prompt still displays. Installed new lamp. "Replace the Lamp" prompt still showing YOU CAN TRY TAKING THE LAMP OUT AND REINSTALLING IT IF THAT DOES NOT WORK WILL PROBALY ...
Question about Epson Office Equipment & Supplies
...also check if the lamp has a small pcb on the side.if the lamp lamp has exhausted then this pcb is at fault. You need to procure new lamp.if 2nd possibility then u need to replace with a new
Question about Optoma Office Equipment & Supplies
...New.aspx --------------- The procedure to replace the lamp:--- to get this procedure.Please click on the link below:--- ...
new lamp or a + head screwdriver. Then slide the lamp cover straight forward and lift it to remove. Undo the screws holding the lamp unit in the case. lift out the lamp, replace with a new lamp and do
Question about Dell Office Equipment & Supplies
...new lamp in it and the lamp light still, is there i put a new lamp in it and the lamp light still comes on, is there something im doing wrong when install the new lamp. My boss got it used and no ...
533 questions posted
Usually answered in minutes!
97 Questions
97 Questions
61 Questions
52 Questions
43 Questions