...cord 3. The lamp operation counter will automatically turn to zero 4. Check if the lettering "0H" appears on the lamp operation counter in the status display 5. After the lamp operation counter has ...
Question about Sony Office Equipment & Supplies
...cord back into the outlet while holding the buttons in Step 3. The lamp timer will reset when the projector receives power. pillurantree but use Always some cloth, never touch the lamp with you're ...
...cord . 3. The lamp operation counter will automatically turn to zero. 4. Check if the lettering "0H" appears on the lamp operation counter in the status display. 5. After the lamp operation counter ...
...the power cord. 4. Use a screwdriver to remove the screws from the cover. 5. Push up and remove the cover. 6. Remove the 2 screws from the lamp module. 7. Pull out the lamp module. PLEASE RATE
Question about Optoma Office Equipment & Supplies
...cord. Use a screwdriver to remove the screw from the cover. Push up and remove the cover. Remove the 2 screws from the lamp module. Pull out the lamp module. Replace the lamp module in reverse the ...
Question about Mitsubishi Office Equipment & Supplies
...cord, and then turn on the master power switch. 3. If the previous steps don?t resolve the issue, the lamp might be at the end of its life. (double check that you get a good one lamp, and that are ...
...cord the lamp light indicator turns ON, but the 'Ready Light' does not come on. Pressing the power button does not turn the projector ON. The 'replace lamp' light is not ON so I dont know if the ...
Question about Sharp Office Equipment & Supplies
lamp hour do the following 1. Plug the power cord into the AC socket of the projector. 2. While simultaneously holding down MENU/HELP, ENTER and DOWN ARROW button on the projector, press STANDBY/ON on
need to reset the lamp timer as follows: Plug in the power cord and reset the lamp operation time by holding down the LEFT/RIGHT ARROW KEYS, and the POWER buttons on the control panel at the same time
...cord, turn on the lamp, and press the Left Arrow button, Right Arrow button, and POWER buttons on the control panel ALL AT THE SAME TIME, holding them all down for about three seconds. Notes: ?Unless ...
533 questions posted
Usually answered in minutes!
97 Questions
97 Questions
61 Questions
52 Questions
43 Questions