Question about Panasonic Office Equipment & Supplies
...projector still working. If LAMP INDICATOR light flashing RED than lamp circuit failure, or abnormal function or lamp unit is damaged. In this case projector doing the same behave just like your ...
Question about Office Equipment & Supplies
...Lamp/Temperature, Red, The projector is overheating, which turns the lamp off ... Maintenance Indicators - ManualsLib www.manualslib.com > ... > Notevision PG-F212X > Operation manual The warning ...
Question about BenQ Office Equipment & Supplies
...bulb and it is being overpowered. I have the same problem, however, my lamp wasn't replaced. Projector working great, just started today. Filter cleaned, reset lamp time, neither helped. Any luck
Question about InFocus Office Equipment & Supplies
...Indicator lamp: blingking (red) Please, what kind of this problem indicated? And how to fixed? Thanks Power - green - is good. Service - red - is not so good Lamp - blinking red - is not so good For ...
...lamp there is a switch in the projector is OFF If lamp cover not fix proper after replacement of lamp the lamp/cover indicator flashing SOLUTION: Open the lamp cover and fix proper and tight the ...
Question about Epson Office Equipment & Supplies
...or the projector, nothing happnes. Do not have another lamp to swap out. is it the projector that has the issue vs the lamp? The ballast board controls the lamp operation. Your problem lies
Question about Optoma Office Equipment & Supplies
projector and use "Lamp Reset" after the lamp module is replaced. Lamp Reset: (i) Press "Menu" ï§ (ii) Select "Options" ï§ (iii) Select "Lamp settings" ï§ (iv) Select
Question about Sharp Office Equipment & Supplies
...While simultaneously holding down MENU/HELP, ENTER and DOWN ARROW button on the projector, press STANDBY/ON on the projector. 3. "LAMP 0000H" is displayed, indicating that the lamp timer is reset. ...
...not shine. check the physical nature of the lamp in the projector. around the filament of the lamp, you might notice dark corrosion building around it. this what normally cause premature shut
...lamp in a Sharp LCD projector requires the lamp indicator to be reset. When the lamp needs to be replaced, the indicator becomes red. Resetting the counter for the lamp hours to zero will also reset ...
6 questions posted
Usually answered in minutes!
123 Questions
44 Questions
49 Questions
35 Questions
18 Questions