ViewSonic PJD5111 Projector "blue light flashing" Questions

...flashing blue lights When switched on it self-tests OK then starts noises of fan, color wheel, lamp lights then after 10-20seconds all stops no fan or color wheel noise and lamp goes off and all ...

blue light blinks and fan blows and no picture It overheated and shut down yesterday and has not been able to turn on since. When I press the power button the blue light comes on, it beeps like normal

...BUT IT IS NOT AT ALL OPENING NO SIGNAL IS COMING WHEN I SWITCH ON THE POWER JUST THE BLUE LIGHT FLASHES AND GO OFF. I CAN NOT RUN THE PROJECTER PLEASE HELP ME i think you have a bad

...light filter on the blue lcd panel is fried due to excessive dust and heat. unfortunately, you may have to replace the whole optical engine. as for the flashing horizontal lines, the power supply ...

...blue light around main switch is flashing. The 2 red LEDs are also flashing slowly. hi, Check the links below http://support.hp.com/us-en/document/c00215415 Replacing the Lamp ...

...BLUE LIGHT CONTINUE TO FLASH ON TOP AFTER THE SCREEN HAS WENT OUT AND WANT COME BACK ON DOES THIS MEAN THE BULB NEEDS TO BE REPLACED how many times does it flash? could be lamp, fans or overheating. ...

blue square of light from the projector for an art piece. Does anyone know if there is a way to turn off the flashing "searching" icon that's in the lower RH side of the screen? Thanks! there may be a

...blue power light was flashing, indicating standby mode. It powered on! I had the unit stored in a cold basement so I think this had something to do with temperature, condensation protection, or ...

...light comes on for about 15 seconds and then goes out. The red lamp and temp lights come on and then trys to restart, does that for about 3 or 4 times and then blue on/off button flashes. Tried TWO ...

wont turn on just flashing blue light there are 2 reasons for it 1, defective lamp 2,the fans is defective