code 010-327 Hi, These are the possible codes and the reason for occurence of this code in your copier 010-150, 155 -Too much or not enough paper in duplex tray 010-300 --Fuser thermistor, 010-302 ...
...CODE 010-327 010-150, 155 Too much or not enough paper in duplex tray 10-300 Fuser thermistor 10-302 Low fuser temperature 010-304 Bad fuser temp 10-308 High fuser temperature or open thermistor ...
code of 010-327. how to correct this error Hello, this error mean that you have a failure on the fuser module. Very likely the thermistor temperature is detected as not ready... If s Power off-on will
Question about Xerox Office Equipment & Supplies
...about replacing toner cartridge. How to stop beeping? error 010-327 we have photocopy machine workcenter 5225 having problem with error code 010-320 xerox 5230 bips 5 times and refuse to print ...
...code 010-327 This is a fuser error, so we'd start by replacing that. The fuser PN is 126K16480. This particular error code may be a false error, in which case either the Power Unit 105E11370 or the ...
Question about Xerox Office Equipment & Supplies
I have received an error code of 010-327 and I need to know what this is Fuser thermal error. Check for paper wrapped around the rollers, but you will need to replace it. PN 126K24980 Whit Item, Inc.
...code 010-327 Open the bac A and make sure the part on the back of the door is on straight. It's the one that mates with the photorecetor. It gets a little crooked and the system jams because of ...
...code of 010-327. plese tell me error solu. The fuser is not warming up properly. Could have paper wrapped around it, but most likely the over heat popped. You will most likely need to replace the ...
Question about Xerox Office Equipment & Supplies
...code is 010-313 and how to fix it Perhaps the info here might be of help to you... Fuser Related Status Codes & how to reset them: C123 style (C123/128/133, M123/128/133, Pro123/128/133) 010-313 ...
CODE 010-327 Solution : Power the Machine OFF and ON CAUTION: Wait at least 30 seconds between powering the machine OFF and powering the machine ON. Damage to the optional hard disk could occur. Press
15 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions