Aurora Global AS1502X Shredder "bad jammed paper" Questions

...paper shredder is jammed in a c... Our Aurora AS1712X paper shredder is jammed in a couple of places with paper so badly that we cannot free the jam and the tooth wheels cannot turn freely. Is there ...

...jammed in the shredder. Won't restart. Could it be a burnt fuse? Can you send a copy of the page from the manuel dealing with this problem OR do you have a solution? Check out this video below. I ...

...jammed the shredder pretty bad. Is there and easy way to unjam? It's a 480 powershredder. First UNPLUG THE MACHINE. Unscrew four (4) screws, two in front underneath top cover and two in back of top ...

jammed. Can even be a accumulation of paper dust. The piece won't be that big but most of the time that is all that is wrong. The paper either jams the door sensor or blocks it and gives the error. It

...jammed with paper. Using a thin probe underneath to push out the paper and forceps on top to grasp and take it out, I cleaned out every bit of paper from each rotating pair of rolling blades. Pushing ...

forward. It is completely cleared of jams. Any suggestions There should be a little leaf switch directly in the middle of where you feed in the papers to be shreadded. It could be jammed or simply bad

Why won't my shredder come on? Plugged into socket? Paper jam? Bad switch?

...jammed behind it. If your machine has electronic sensors (little glass bulds located in same area) your paper feed sensor may not be bad, just dirty, they can be cleaned with a q tip with a little ...

...paper jam. I suspect that the circuit board has gone bad. How can I confirm that, and get a replacement circuit Board? It just sounds like a paper dust problem. use canned air to completely clean all ...

...paper behind it causing switch not to activate. If it is an electronic sensor you probally have a burned out sensor, switch or a bad pc board. You will need to contact manufacturer for info on part ...