Hunter 27185 Remote Control "fan switch housing model" Questions

...fan for about 3 yrs. Also you can check the "Dip" switch settings in the remote ( remove the battery cover they are located behind the batteries, you can move them with a pen) and inside the fan ...

...fan remote there should be something called a "dip switch". it wiil be numbered 1,2,3,4, just flip these switches up or down to match the receiver that will be located in the fan houseing or in the ...

...switch on the side of the fan motor housing. Slide it the opposite way to reverse it. Make sure you wait until the fan comes to a complete stop to do so. Never reverse it while it is running, you ...

...switch which you will need to ppush to the on position to send power to the fan, then the remote will do as it is supposed to do. If you find that it is not the wall switch, then I would check the ...

...fan up remote cant be found If you wish to get setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some ...

...fan. The light comes on at the switch, but everything else operates from the remote. I have a new battery in it and the light comes on in the remote when I try to change the fan speed or dim the ...

...fan works, but the light will not work with either the remote or the wall switch. We replaced all of the light bulbs and disconnected and re-connected the light assembly and still nothing. All 3 fan ...

...fan wont come on at all. I got another receiver just like it a set the code but nothing these fans must be reset as follows remove the battery from the remote manually turn off the wall power switch ...

...model UC7067RC Hampton Bay ceiling fan. There are numbers 1234 and remote does not work Please help. Thanks Call Fan Man Lighting in Minnesota at 1-866-600-3267. They have 30 years experience and ...