Danby DDW1899WP Portable Dishwasher "softener salt" Questions

...softener salt in the salt tank. When a "Salt Bridge" occurs moisture has been drawn up into the salt and formed a crust on the water softener salt. When a salt bridge occurs there are two ways to ...

...softener. If you are observing that the salt in the dishwasher compartment is being flushed away in a single cycle, it could be caused by a few different issues: Overfilling: If the water softener ...

...This is just to let you know that the internal water softener needs water-softener salt. If you do not use the softener (I do not at my house) then the light serves as a convenient on/off

...softener. The salt particles are larger than the size of table salt particles, and dissolves slowly enough that it will not clog the softener unit. This salt does not have added iodide salts, and it ...

...softener unit. Salt light is on when either the salt (used for softener regeneration) is low or the water softener unit is not working correctly. First try and recharge the salt in the container ...

...softener unit. Why Do I Need to Use Salt in my Dishwasher? Salt is needed to ensure that your dishwasher's in-built water softener gives an optimum performance. You will especially need to use ...

Hi. Just bought a Blomberg dishwasher & have a question about the water softening feature. What is the appropriate type of salt? The manual says no table salt, no coarst salt. It recommends a ...

...softener salt included in them, but opinions vary as to effectiveness. You can also install a unit which softens the water before it gets to the dishwasher ...

softener is full of salt - but the machine fails to use any salt at all. We have probably done 20+ washes with no reduction in salt level - the water softener remains full of salt. Help! Paul Derlacki

... Fill the softener with warm (not hot) water, this will cause some of the salt to come out, but should allow the float to move. If not, then you might need to replace the softener or worse case the ...