2wire (2701HG-B) Wireless Router "put back factory settings gateway" Questions

...put it back to factory settings. wait for the modem to reboot (wait approx 2 minutes) Good Luck. There will be a small reset button on the back that you will have to hold down for 20 seconds with a ...

...put the disk back in and reinstall??????????. I can access the internet since pressing restart but it says that my connection is unsecure. Hello, When you reset the router all configuration settings ...

...back of the router it gives all the default information to use on a web browser (to avoid the runtime error) Press the Restore Factory Settings button, on the bottom of the unit, for 6 seconds. ...

...back: you need a pen to push it down. Hold it down for about 10 seconds and it will put the router to factory default settings. You will then need to reconfigure the router using the Belkins setup CD ...

...put in the correct IP address? If you are refering to the router, there is a small button you can use a pen to press and hold while the router is on, Hold for about 10 to 15 secs - You will see the ...

...put the router back to default settings. Its frustrating sometimes but usually works by prolonged resetting and power cycle. Good luck! Ok, after reset, you need to make sure that your laptop is ...

...put a username. If you did set a password or that doesn't work, you can then reset the device to its firmware (factory) defaults by pressing a pin into the little reset hole on the back for about ...

back to factory settings and by that the time you can check if wireless is on { LED light } . Also check encryption , your wireless client installed on your PC or Windows Zero Configuration is started

...put whatever you changed it to as password.
click on administration
then click on factory defaults.
click on restore all settings. i would click on it 3 times just to make sure.

...put in is 192.168.1.1 That almost always is the default gateway address to the router that you are connected to. Once in a while, it will be slightly different...i.e. 192.168.0.1 or 192.168.2.1 or ...