D-Link DIR-600 Router "tiny url" Questions

tiny pinhole located somewhere at the back of the router. Once it was reset to default, you can plug it and open a browser with the url http://192.168.0.1. Type admin as your username and password and

...tiny hole with a reset button just inside. Hold the reset button in for 10 seconds Should return to factory default. Find out the IP address (factory) e.g. 192.168.1.1 With ethernet cable attached to ...

...URL bar in your browser: 192.168.0.1. and hit enter. It will take you to the router setup page. The user id and password will be admin and admin or admin and password, unless you changed them during ...

...tiny reset button at the back. Open your Internet Explorer Click on Tools then click Internet Options Click the LAN settings button under the Connections tab Check the Use Automatic Configuration ...

...URL.. http://192.168.0.1 The default login = admin The default PW = blank (just press Enter) You can now configure the wireless settings. To secure your wireless network from unauthorized ...

URL is http://192.168.1.1 The login = admin and the PW = admin Hi friend At the back of the router you will see a tiny red or black button that is a reset button, push and press that button for 30secs

URL address field), enter the IP address for your wireless router ( the DEFAULT GATEWAY. This information should be contained in your router's manual. If you cannot find it, enter "198.168.1.1" as the

URL address field), enter the IP address for your wireless router ( the DEFAULT GATEWAY. This information should be contained in your router's manual. If you cannot find it, enter "198.168.1.1" as the

URL address field), enter the IP address for your wireless router ( the DEFAULT GATEWAY. This information should be contained in your router's manual. If you cannot find it, enter "198.168.1.1" as the

...tiny hole through which you stick a paperclip tip to activate. This button may need to be pressed for several seconds, to avoid accidental resets. Once reset, your router will revert to default ...