Adcom GFA-5802 2-Channel Amplifier "amp off" Questions

...Amp My question is: The on/off switch is very hard to turn!!!Almost need pliers to turn it, Well, My buddy used the pliers I think!!, Well, now only 1 channel or 1 speaker is playing, the other ...

...amp it works perfectly. This is most likely to be a heat issue where the amps overheat and shut themselves off then cool down and turn back on. Please check that the amps have proper ventilation and ...

off the amp. it still buzzes even if i turn off the pre amp. but when i bypass the pre amp and go straght from the CD player to the amp, it works fine and doesnt buzz. Whats wrong? HI SIR .THAT IS NOT

...off the amp first, and turn off the mixer second. start with the mixer levels at the lowest, with the amp levels about 1/2 to 3/4 up. slowly raise the mixer channels first and then the mixer main ...

...Amp to switch off when I press the power button? There is a single blue dot in the centre of the Amp's display? I have tried pulling the main power cord out.. I have turned off the main? I am stuck? ...

...amp to my speakers will this work. Hi juicer, If you use the switched outlet, then everything will be turned on/off when you operate the preamp power switch. Use the unswitched, then you have to turn ...

...amp the power shuts off. Its not loud but it still shuts off. What do I do? check the nomimal ohms or impendance of the speakers if it matches the amp capability. Your amp manual should specify the ...

...amp cuts off and the red fault button comes on..i have amp turned down to a resonable level but the red clip light constantly blinks as if its to loud but it is'nt it is most likely that the shutting ...

...amp. Because off the chromatic tuner mode, no sound is comming out from the amp. When I start the amp, there is just an "A" appearing on the tuner screen, and that's it. So, I'd like to turn it off, ...