Toshiba Satellite L505-S5966 Notebook "rubber keyboard cleaner" Questions

...keyboard, or could be some old rubber thats not flexible enough. If you carefully flick a key off, you can investigate what's going on under there. The keys snap on and off rather easily. If you see ...

...keyboard and remove it. Power on the laptop and let it boot. Once its to the desktop you can see your result. Then all you need to do is pop out the S key and spray contact cleaner underneath rubber ...

rubber circular piece. Gently lift both of these pieces out of the keyboard. Wipe the keyboard sensors clean with a dry cloth. The sensors are the little silver foil-like strips you see after your key

...keyboard. Place the rubber part on top of the metal circle you just cleaned with the cotton swab. Then place the key retainer (big side down) on top of it, and "click" it into place. It is very ...

keyboard, and rubber components. REASSEMBLE Place all rubber components into the keyboard. Install keys with wires. Make sure wire is secured in the key, usually snapped into place. Place ends of wire

keyboard, and rubber components. REASSEMBLE Place all rubber components into the keyboard. Install keys with wires. Make sure wire is secured in the key, usually snapped into place. Place ends of wire

keyboard is not nessesarly your best option, the keys have a rubber boot under them, and are held in place/returned into their postion by a plastic spring/hinge. It is possible to carefully prise the

...rubber components on the keyboard. Next, fix all keys in their respective positions cautiously securing the wire in these keys. Use your finger and press down all keys, one at a time, firmly so that ...

keyboard, and rubber components. REASSEMBLE Place all rubber components into the keyboard. Install keys with wires. Make sure wire is secured in the key, usually snapped into place. Place ends of wire

...rubber shut off located at the back left top of the keyboard the screen lights up and then goes off. If i keep tapping the screen wiill come on and stay for a few seconds and go off again. If I plug ...