...white strip that is usually located under the main glass(depending on copy model). The copier shines light (from the bulb on the scan carriage) onto this white strip and reads/measures the reflection ...
...white strip. Leaving the 3.5 inch white strip on the floor. Does anyone know how to minimize the waste? Any advice would be appreciated. try to reset the settings in the printer panel inside the ...
Question about Canon Office Equipment & Supplies
...white strip that is located underneath the cover on the left side of the white film.clean thin glass strip located on the left side of the scanner glass of the flatbed.tried making copy using adf.if ...
white strip on copy when I make a copy directly from my computer, the page has a white strip on it. Like is not getting enough ink on paper? While you make an printout, open cover when the paper is ...
Question about Canon Office Equipment & Supplies
...white strip behind ink cartridges coiled My printer made a big noise, then the red lights started to flash, now a white plastic strip behind the ink cartridges is folded over and the ink cartridges ...
...white strip. Seems as though toner is not applied there, affects all colors. on the 3010cn open from cover, follow instruction for pulling up the lever and sliding the bar out of the side repeat the ...
Question about Canon Office Equipment & Supplies
white strip with tow blue ends. Now my printer wont turn on....I took it apart but don't know where this white strip goes... Sounds like the encoder strip. There's a hook on one side, itgoes through a
Question about Sharp Office Equipment & Supplies
...white strip under the original glass. This strip is located under the left edge of the glass...under the scale that has the original sizing on it. The machine uses this strip on start up to reference ...
Question about Xerox Office Equipment & Supplies
white strips in black area only after muti clean white strips in black area only after muti clean please check for foreign particles in your developing unit and charge and transfer units
white strip under the glass. If the copy lamp has failed this will also give this code. With the power off and the machine unplugged try cleaning the mirrors and the white strip under the glass. It is
374 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions