Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher "water line connection elite" Questions

Ad

Question about Dishwashers

1 Answer

...hot should water be? How hot should my water be going into my kenmore elite dishwasher. it actually should heat the water once it is in the machine the dishwasher connects to a cold water supply ...

Ad

...the line from the pump and remove the hard pipe from the pump. Clear debris and reinstall. Should use a shop vac to remove the water within the dishwasher or you will have a mess to clean

Ad

Question about Kenmore Dishwashers

1 Answer

...line behind the machine. If that newspaper gets wet you will know that the drain is sometimes overflowing. If that is the case, snake that drain or force a garden hose down it and run hot water thru ...

Question about Kenmore Dishwashers

1 Answer

...water line and enough drain hose that you don't have to disconnect them under the sink. Find the power line and check for voltage and the connections at the wall. I've seen bad connections a lot of ...

screen is not clogged. Try running it without the water pre-heat feature also. BTW, it should be connected to the Hot water line.Temp. sensors will cause erratic problems in this case. Hope this helps

line back to make sure there is not a valve that was accidentally turned off. The connection is usually made to the hot water supply pipe under the sink, and there is often a separate cutoff valve for

...water line... connections all tight. It's only 14 months old! Kenmore dishwashers should be recalled!! Their poorly designed computer circuit boards are all malfunctioning around 15 months. Look on ...

Question about Kenmore Dishwashers

5 Answers

...water supply line copper For a dishwasher only 2 years old it is hard to believe that the roblem is with the dishwasher. If the problem continues, remove the dishwasher, replace the line from the sin ...

Question about Kenmore Dishwashers

2 Answers

...water (and hopefully anything else) from the drain line. Then reconnect the hose, and test the unit. If you have checked the air gap and the drain hose and can?t locate the problem, then it is an ...

...WATER, IS THERE A CLOGGED FILTER Check the shutoff vale under the sink where your dishwasher water line is connected to ensure it is full open. Also, check for a kinked water line to the

Not finding what you are looking for?
Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher Logo

538 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

vince

Level 3 Expert

2530 Answers

Paul Carew

Level 3 Expert

3808 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...