Kenmore 16602 / 16604 / 16609 Built-in Dishwasher "elite latch problems" Questions

elite undercounter dishwasher I had this same problem so I took the front panel off to access the thermal fuse. What I found instead was that food had become lodged in the door latch which was keeping

...Elite 13783. I tried cleaning the dispenser and using new detergent, but that does not help. The lid opens freely when I push on the release latch. Thanks for your help. Hi, There are three common ...

...elite dishwasher leaking below washer Started washing leaking on next floor see this causes and use the common sense. God bless youDishwasher Not Leveled This is a very common reason for a leaking ...

Elite Model 13782 Dishwasher The door will not close, it keeps jumping open even when empty (there is nothing pushing it from the inside. I have had it for about 8 months. Hi Lulie, I had a dishwasher

...Elite 665 series dish washer with the clean light blinking. It blinks 7 times. I have reset it it with the normal wash-heated dry buttons several times. After a reset it goes through some steps and I ...

Elite Dishwasher 630 1630 9400 Soap Dispenser Problem Sometimes the soap dispenser is still closed at the end of the cycle.  Othertimes, it is open but there is still soap in the dispenser.  

...elite keeps blinking and will not stop and the dishwasher will not start That blinking light is trying to tell you that there is something wrong with your dishwasher. Watch that blinking light.... ...

...Elite 665.13443K901 model number. The detergent cup is not opening. A new model DISHWASHER CAR. The latch, spring is all good. Checked the resistance on actuator, measured 2700 ohms. What else can I ...

...Elite 16579 Hi Check float to insure that it is free to move, it sounds like the dishwasher is over filling. That is assumed that you have not changed the type or amount of detergent being used.Also ...

The door won't latch The door would not stay closed. I made sure that nothing was keeping it from closing and realized that the latch was not grabbing. I looked into the latch and pressed a white ...