Kenmore 16602 / 16604 / 16609 Built-in Dishwasher "dish door latch blinking" Questions

...door latch system or switch. Your door may be closed but the control still thinks it is open. Check the door latch and switch alignment. GE had a problem with the doors dropping slightly about a year ...

door latch lost its grip and hangs loose when you touch it. Any ideas? I have a sink full of dishes and not-so-happy wife. Thanks for all your help. the door latch actually has usually 2 microswitches

...dish washer will not compleat a cycle....then it shuts off before the soap is even rinsed off ...Then the green clean light flashes. I have reset it using the coad can. norm reset combo I got from a ...

...outside of the door says "okay to add dishes". The d/w will not run. Help! Sounds like the door latch could possibly be bad. If its 5 months old its still under warranty. Call the company for

...dish washer it has been stopping throught the cycle and the lights will flash on it what could couse this to hapen and what part will i need to fix it Next time this happens, try pushing in the door ...

...door switches. You might need to take the latch out (unplug the dishwasher first!), remove the switches, and clean the plastic parts with water, dry it, and then re-assemble. The other thing to check ...

...door is closed. My Ge Quiet Power 3 Dish washer has been acting strange lately. One day after I loaded it and closed the door, the control panel started blinking, beeping, and clicking rapidly until ...

...dish flashes with two blank lines in time window. Nothing responds. Model KUDP01DLBL3 Hi Thanks for using FixYa. This issue can be either due to a faulty door latch or door lock switch which is not ...

...door latch, and it seems as though the heater works as the dishwasher is warm inside. What else can I do or try? Maybe the heater isn't warm enough how do I test that? Please help! 5 kids=lots of ...

...door latch issue. Press the following buttons in sequence: Hi Temp Wash, Heated Dry, Hi Temp Wash, Heated Dry. If this doesn't work, check the tech sheet. (should be stuck to inside of the bottom toe ...