Kenmore 16602 / 16604 / 16609 Built-in Dishwasher "clicking sound starts" Questions

...clicking sound seem to be coming from? Start the machine and when it's filled with water, try to identify where the clicking noise is emanating from. I suggest putting you ear next to the programme ...

...preparing the dishwasher for the next cycle. Since this problem existed, we do not hear those clicking sounds anymore when the operation is finished and we open the door. Intermittent door ...

...like the same problem. The time keeps ticking down but it flashes between CL and the time while the clicking sound is going, and it sometimes make a clunking sound while this is happening as

...clicking sound coming from under it when the machine starts, then it might quit then start back up again. I doubt it has been used 20 times so far. What would be causing this clicking sound? And we ...

clicking sound from the control module @ 10 seconds. This can go on for hours Could be a few things and for all, you need a service engineer to diagnose and replace. Please don't leave it clicking for

machine starts fills Ok but when it clicks on to start the wash pump, nothing happens, I can hear a faint hum. When cancelling wash and starting new wash it pumps out ok too. After rinse cycle it ...

my dishwasher wont start all controls light up as usual, but when I press the panel to start, nothing happens. Check the float switch inside the tub, near the front corner. Looks like a dome. Move it ...

My Whirlpool dishwasher won't drain and won't start, it makes a slight buzzing sound then clicks off... While this could be a number of problems, I'll start by asking how old is the unit?

sound stops if door is opened, but starts again when closed. There is a problem with drainage. Check the drain line connected to the disposal or peatrap. Make sure it is not plugged. Otherwise you can