Question about Building Materials
...Door: How to fix single car garage door that is in raised position, on tracks but will not move using the power opener or manually? Title: Garage Door Operation. The door was backed into with car. I ...
Question about liftmaster Building Materials
...fix this? The door will not close. Who can I talk to? Sounds like you have a chain drive garage door opener and you hear a humming sound when you push the wall console. The motor is running but the ...
Question about Chamberlain Building Materials
...force sensor tripping. First check for track obstrucions by manually moving the door with the lift disengaged. If door works without excessive force, then increase the force sensor of the lift a
Question about Chamberlain Building Materials
...LIFT THE DOOR. EITHER THE MECHANISM IS JAMMED OR THE DOOR SPRINGS ARE BROKEN SO THERE IS TOO MUCH FORCE ON THE BELT AND IT SHREDS.. TRY LIFTING THE DOOR IT SHOULD GO UP EASILY IF THE SPRINGS WORK. IF ...
Question about Chamberlain Building Materials
...will not open it chamberlin model 7200 IF THE DOOR WORKS PROPERLY - MANUALLY TRY ADJUSTING THE UP SENSITIVITY. IF IT IS HARD TO LIFT OR CATCHES ON ANYTHING - YOU NEED TO FIX THE DOOR. HOPE THIS ...
...Lift Master system will not work when the weather is cold. I bought a Universal remote to fix this problem only to discover that the Government in their wisdom out lawed this system. Does anyone hve ...
Question about Chamberlain Building Materials
...door. Same problem with all clickers and even those programmed into the cars. What could this be and better yet, how do I fix it? Lift-Master 2000SDR opener. Opener generally works fine from the ...
Question about Building Materials
...fix this? your door motor should switch off the door sensor once it is fully closed either to door has not been set up correctly so the sensor has not been deactivated when fully closed or the door ...
...door should be FREE to lift by hand. With the door Free of the motor/line-pulley, lift by hand. Do so a number of times and see if it binds or is free to move up and down easily. If it binds, the ...
Question about liftmaster Building Materials
...fix .how do i set the tension. and the roller brackets is there a diagram to tell how to install,there a two holes and i can't remember how it should go on.there is also no grease on the rails. ...
186 questions posted
Usually answered in minutes!
17 Questions
0 Questions
