Chamberlain 1/2-HP Whisper Drive Belt Drive Garage Access System "door motion sensor light" Questions

...motion sensor on my Chamberlain Liftmaster garage door opener? It's too sensitive and the light comes on when someone comes up to the front porch, likely because the motion sensor senses motion ...

motion detector on the Chamberlain 3/4 HPS Whisper Drive Plus Belt Drive Garage Door Opener with EverCharge There is a button on the side of the wall-mounted remote. It has a pic of light bulb next to

...motion sensor lights are not lit up at all, can open with car remote or wall mount button but will not close with car remote, only closes with wall mount button if you hold it the entire time until ...

...I enter my garage in the AM. How do I stop this? If you have the door opener with the motion sensor you can try disabling that function. There is a switch to do so on the side of your wall

door while it is in motion. They also will stop the door if there is an object in the path - if it is more than 6" in height. The most common reason that the green light is off is that the two sensors

...door opens fine by pushing the button once, but won't close unless I hold the button down through the whole down motion. The problem is with your safety "eyes" on your system. I bet the lights on the ...

...motion detector for light on my Craftsman 3/4 HP GARAGE DOOR OPENER Model 139.18050.It turns on when door opens and doesn't turn off and doesn't turn on when you walk into garage, you can turn it on ...

...door. I changed the battery thinking this was the problem, no fix. I tried temporary password option and no fix. I aligned and cleaned motion sensor devices, no fix there is no lock button to hold ...

...door that is tripping the sensor). This inconsistently happens at various other points along the path. the sensors are clean. I cannot tell if they are pointed directly at one another, but they are ...

...motion. Check the door sensors. They must be pointed at one another and the small light on each one must be lit and not flickering. Tweak them if necessary. If you cannot get both lights to come on ...