Sanyo DP19649 LCD TV "sensor working" Questions

...sensor on the tv is not working, therefore the remote does not work. Tries a little Alcahol with a Q tip clean the tv IR sensor,do the same to the remote and change batteries,tv sensor saldom ...

...doesnt work the remote control work very well but the tv not that can be caused by either the IR sensor board or the main board. The IR sensor board would be suspected first. You can get the IR ...

can't change output source and tv sensor wont work I bought the tv as an "open box display" item everything works ok but im guessing the sensor doesnt work because no universal remote will work and i ...

My onida ky thunder 37207_308sp sensor ir not available rimot not working Hi Amir, If the original IR sensor is not available, put any other sensor available. It works.,

...sensor not working Check battery on your remote.   If you have opened the set and know that the sensor is not working, check whether it is getting voltage at one pin.  If it does, you ...

...sensor quit working. I am my lg 42pc5d tv remote sensor quit working. I am positive it isnt the remote. How can i fix this? Check on the back of the TV to see if you have a "remote in" port. It will ...

...sensor is not working The failure to IR sensor inside the TV is a very rare case. Check the infrared emission to the remote control first. Check it with fresh batteries. Make sure that it works well, ...

...sensor is properly working you should have a cellphone with camera, point the sensor to the camera lens then try to press any button then look in to the monitor of your cellphone, you will see a red ...

Remote sensor does not work. Have tried three different remotes Tv works fine. Just can not get a remote to work. Reset tv to factory settings, removed batteries from remote and pushed all buttons, ...

sensor not working Remote sensor is broken. Can I fix this  Some advice--the sensor if bad requires the set to be opened and will be on a tiny board--whole board would have to be replaced as this