...dish box is connected to the TV is the selected input on your TV. You should have either a component connection (5 cables) or HDMI (1 cable) connecting the dish box to your TV. The VX37 has two ...
Question about Apex Digital Televison & Video
...the dish and plugged it in Check the input location on your TV that your DISH is plugged into and make sure that you select the same input with your remote or on using the input button on your
...video connection . you can also connect the rf input of the tv and select channel 3 or 4 on tv. Hdmi will give you the best picture especially if your Dish sevice provides High definition
Question about Apex Digital Televison & Video
...I now have snow on the screen and can't find my owner's manual to get it back to the correct channel to receive the Dish signal. HELP Press INPUT button on your TV remote and select right
signal for dish If you have selected the input from your tv input selection menu then replace the main board. Typically the inputs are on that board but not always. this depends on the brand and model
...Dish Network IS turned off. Please advise. Thanks. You will probably have to use your tv remote and change the input for your dvd. It's usually video 1,2 or component 1,or 2 Look at the INPUTS you ...
...you are able to pickup. Connect Sat reciever to one of the other input on the tv. Then go to INPUT or SOURCE on remote and select tv for local and what ever input you sat box is connected to for
...input (AV1) on the TV, you will have sound from the dish system, but no picture. I suspect you are using an RCA type AV cable with red, white and yellow jacks on both ends. You've most likely ...
...dish hooked up a anttena but no signal Go to main menu and select settings, initial setup, TV signal input, select Antenna, go to channel scan, select digital channel scan if there is a choice, or ...
...input in order to receive the DISH picture. You can select an input by finding a button on the TV remote or the TV itself that is listed as input, source, AUX, mode or video. You will need to cycle ...
288 questions posted
Usually answered in minutes!
97 Questions
59 Questions
71 Questions