Kenmore 24 in. 15932 Built-in Dishwasher "stop working power went" Questions

...working a while ago where the power went off and stayed off (no lights anywhere). I've checked the power point and it's okay. I've flipped the dishwasher over to look inside and I can't see a fuse or ...

working. Hubby went to check/replace power cord and you could see that it had overheated badly at the power cord box. You should call samsung and report the problem. There may not be enough reports to

...stop working and I checked the fuse and it was not blown. I went to my basement and they junction box the dishwasher is hooked up to has power. I think the thermal fuse is bad but how do I check to ...

...power in the complexes where I live went off and on about 5 times in less than 2 minutes, right after it came back the dishwasher GE Profile series PDW9880 was waking a VERY loud beep and it s a ...

working fine then it just stopped and led screen went blank water didn't drain out and now it wont go checked handle and contact there both ok stopped just after starting cheers. This is an indication

...working out of the blue. Loaded it and pushed start but no power. Then today I was walking through the kitchen and there were lights lit and flashing on the control panel. I pushed cancel and all ...

...working part way through, the lights went out on the front panel. I checked to ensure there is power to it which there is, I opened the inner door up the fuses on the door latch are good(power going ...

working. NOTHING!! it was fine one day then went kaput the next. I checked the plug in and the circuit breaker but still NOTHING I run into this often. Ends up being loose, broken or burnt ellectrical

...working with it (just pushing buttons, not getting inside) the Light Wash button worked and it completed the cycle. Then the Normal Wash button worked and I hit Cancel to stop it after just a second. ...

...working no power...i just used it and went to do another load and no power. I checked the outlet and there is power. what part could be the cause of this? Thanks Hi First make sure that nothing is ...