with water. I tried to take it apart but there is some kind of screw that has a star in the head but is not a phillips. Clogged ore bad water inlet valve. It's called a star head screw. buy a star bit
Water inlet screws Kenmore Quiet Guard Deluxe Dishwasher water inlet valve has screws that have a star or allen head with a nipple in the middle so a standard set of allens will not work. How do you ...
Question about Neff Dishwashers
...model S9151F? There are no obvious clips and all the screws have a star shaped head. get a star shaped screw driver usually in a security bit set and go at it Does the door slide or is it
Question about Kenmore Dishwashers
...allen wrench and and a phillips head those would not work. Is there a different type of wrench used to remove those screws? Try a Torx screw driver. It looks like an Allen but it is a star shape
...Hello, If you are talking about the star shaped headed screws that are called TORX screws and TORX screwdrivers are readily avalialbe at all hardware stores (Lowe's,Home Depot, Ace Hardware
...star screw driver (may not work with other screwdrivers) and release the bolts (screws) then slide the door upwards. Hi when you open the door there are two hole about a therd of the way down each ...
Question about Kenmore Dishwashers
...to tighten up my water inlet screws on my kenmore quiet guard deluxe dishwasher. The screws have a star or allen head with a little nipple in the middle. How do i go about tighten these? Where can i ...
Question about Dishwashers
screw looks like a star. It may be a different head screw. Dish washer door handles are made of plastic. It is not uncommon for the handle housing, the handle or the retention spring to break. On some
...Star dishwasher (no clue what the model is). Door will not latch. Inside of door says to press and hold ''Heated Dry'' 5 seconds to lock control and repeat to unlock. This is not helping. We rent and ...
...power then just remove the screws on the inside around door and separate the panel, you will need a star head driver or a hex driver will work to. from the inside you can remove the wire harnesses ...
291 questions posted
Usually answered in minutes!
485 Questions
206 Questions
161 Questions
175 Questions
145 Questions