Motorola Talkabout® T9500 Two Way Radio "roger beep ptt release" Questions

...roger" beep and the "button" beeps. Below is an excerpt from the owners manual explaining the simple procedure. ?Roger? Beeps/Talk Confirmation Tone When you turn this feature On, your two-way radio ...

...Roger Beep (aka talk confirmation tone). If holding in the minus button while turning the radio on does not turn it off, there might be something wrong with the radio, such as a one of the other ...

...ptt and it immediatley 'roger beeps' talkabout T9500/9550; few years old, used only during hunting season. Can not transmit, beeps me out. Beeping when you press the PTT button usually ...

...roger beep" icon. It would not be the reason your radio is not transmitting. Most likely your programming has been changed. Here is a link to the manual where you can read how to program the radio's ...

...BEEP ON MY RADIO. I DON'T HAVE THE MANUAL! Hi, In a Motorola T500, pressing the + button while powering on enables/disables the roger beep (release of PTT button). Good luck and kind

...ROGER BEEP Roger Beep is a BEEP that is sent to notify the end of transmission. Roger Beep can be heard through the speaker when Key Beep is on. Roger Beep is transmitted even if key beep is turned ...

...roger beep' you could get following the release of the PTT. See the instructions near the bottom of page 25 of the user guide: http://www.giantintl.com/ContentManage/manuals/Moto/T65xx.pdf If you are ...

roger beep, when you release the PTT, is that correct? If so, your manual if you have one, and if you can decipher CHINGLISH, will tell you how to stop the ROGER BEEP. Because these nasty little units

...roger beep" turned on. Here is a link to the user guide: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T5320_T5410_T5420_User_Manual_E.pdf See page 19. Holding the + (plus) button in while ...

...the button? Hi, In most Motorola T5XXX series/models, pressing the + button while powering on enables/disables the roger beep (release of PTT button). Good luck and kind regards. All fixed!!