...beep on both PMR's ... so, no speaker problem. I also checked the settings on both PMR's and they are identical. Thnx It sounds like a PTT fault as presumably the headset has its own ptt? Try a
...PTT and a David Clark Headset. This setup has been working fine until recently when it started producing a feedback like squeal on PTT which is also transmitted over the air and in the side tone. The ...
Question about Motorola Radio Communications
...headset has an in-line PTT, don't alternate between it and the one on the radio. If there is no in-line PTT, use the PTT on the radio unless you have your radio set for VOX. If using VOX mode, do not ...
Question about Motorola Radio Communications
...PTT on the headset cord one time before switching the dip switch to VOX. (Assuming you have a headset with the small box in the line.) Check your VOX/ iVOX settings. You will need VOX for using an ...
Question about Motorola Radio Communications
PTT headset. I can transmit OK but I am not receiving anything other than a ''click'' when the other person transmits. I have tested the headset and I am able to recive audio through the connection OK
Question about Motorola Radio Communications
headset has an inline PTT, it may not be compatible with the radio and you would need to use the PTT on the radio.If this doesn't work, you would need to use the TalkAbout headset designed for the
Question about Motorola Radio Communications
PTT on the headset cord one time before switching the dip switch to VOX. (Assuming you have a headset with the small box in the line.) Lastly, if you continue to have difficulties, contact Motorola at
Question about Binatone Radio Communications
my binatone mr200 walkie taklkie's talk button wont work how do i fix it Spray "CRC 2-26" into the PTT button;then press the PTT button 10 times.Do this without the battery connected,then wait
headset, turn on the radio, then talk using the PTT on the radio. Shut the radio back off. Then insert your headset plug, being certain it is seated (click) into place. Then turn the radio back on and
headset, turn on the radio, then talk using the PTT on the radio. Shut the radio back off. Then insert your headset plug, being certain it is seated (click) into place. Then turn the radio back on and
32 questions posted
Usually answered in minutes!
165 Questions
90 Questions
92 Questions
70 Questions