Kenmore 15121 Built-in Dishwasher "latch" Questions

maytag MDBH950AWB handle/latch failed. A spring in the door handle seems to have failed. Replaced handle/latch unit. Killed power to the unit. Removed the inside door panel then unplugged the two ...

door wont shut Can door be adjusted as lets heat out Door or Lid Latch Assembly If the door won't latch, the latch assembly might be defective. Inspect the latch assembly to see if it is cracked or ...

...shaped pin .,......when I push this pin sideways, the door opens easily. Is this caused by a faulty latch assembly...many Thanks Deb Hello Open the dishwasher door and inspect the latch mechanism for ...

The door won't latch The door would not stay closed. I made sure that nothing was keeping it from closing and realized that the latch was not grabbing. I looked into the latch and pressed a white ...

My Bosch dishwasher door latch is stuck in the locked position--anybody know how to reset it? My Bosch Dishwasher Model SHX9ER55UC/50 has the latch in the body of the dishwasher--the latch hook ...

Need door latch diagram Kitchen Aid dishwasher (Part No. 9744033) I have a Kitchen Aid dishwasher (Part No. 9744033) that had door latch that would not work. I took the top panel off to get at the ...

Maytag Model # MDB7600AWW door will not latch Problem with door latch. Replace door handle and latch and dishwasher will still not work. THe door latch sounds like it is latching but you can pull the ...

... or sometimes the interior liner of the door. If it's defective, you need to completely replace it. Latch The latch on many dishwashers is adjustable. If your door is easy to close but difficult to ...

Kitchenaid dishwasher - door will not latch Sometimes, when the door is opened before the cycle ends, the door will not latch until the cycle is canceled. (press the cancel button) This time I have ...

I have a GE dishwasher model GSD1100G and the door will not latch now. Any ideas? Yessir, I have a few. 1. Check the latch and strike. Usually, they're just loose. 2. Check the wiring to the switch. ...