Canon PowerShot SD940 IS / IXUS 120 IS Digital Camera "battery stuck" Questions

battery is stuck One of the batteries is stuck, its the positive side up. Does anyone have a suggestion? I have drilled a small hole in the exposed end of the battery, taking care to not let debris ...

...stuck open with lens error. Changed the AA batteries but not the disc battery. Could this be the problem Put in real Kodak batteries. pull out the lens a bit. same just happened to mine I can not put ...

stuck The battery door is stuck. I can move the lock but nothing happens. Your battery leaked probably alkaline batteries left in the camera too long. You can dissolve the leak with water and clean up

...battery. Still will not turn on, though I get a brief flicker of light...my lens is still stuck out. The lens probably has some dirt or grime stuck in the lens motor. If you can gently twist the lens ...

...stuck inside and when i turn it on it beep and say's lens error restart camera try taking the battery out and wait for 10 seconds and replace and see if that helps try taken batteris out and ...

Shutter stuck I had not used my Canon S2 IS camera for few months and was facing same problem(stuck shutter). I followed your instructions initially with no success, however later during each attempt ...

...stuck shutter. If so, please see this link for further info and a simple fix that may help. I have the same problem with my Power Shot S2 IS, but believe the problem stems from something not making ...

stuck battery door on dsc p93a I dropped my dsc p93a camera and now the battery cover is stuck half open I can not get it to open or close help There is usually a lock on the inside of the door. ...

stuck shutter. If so, please see this link for further info and a simple fix that may help: Try putting a different battery and memory card in the camera. I had this problem and was ready to scrap the

...stuck at movie mode ,it can be replaced. Had same problem and I fixed it by turning it off, taking the battery AND card out for a few minutes and then making sure I had it switched to still mode, put ...