Lexmark X364dn All-In-One Laser Printer "lined 1 inches" Questions

I am getting a 1/2 inch black line down the center I have a Lexmark X6575 All-in-One and am getting a 1/2 inch black line down the center of my scanned or copied page. What is causing this? reset ...

Black line during scanning After I scan a document it comes up with a 1-inch black bar on the page. Help!? Clean the scanner bed with the clean cloth and try to make a copy if it stills as a black ...

CATRIDGE ERRIOR hi, It says it is ok to print, however when the first page starts it doesn't complete it and then says "catridge errior." If your could help that would be good thank you. Please remove

Lexmark x3330 Error message So i have a Lexmark x3330, and i keep getting this error message:"Left cartridge incorrect". I tried powering off and on, removing the cartridge and so on. Any suggestions?

indicating a carrage problem, carrage going to fast and slaming into one on start up The encoder strip is most likely the problem. Unplug the power from the printer. Open the front cover and move the ...

alignment problem hardware error 0502. Printer is an X6150.Can n alignment problem hardware error 0502 The encoder strip is most likely the problem. Unplug the power from the printer. Open the front ...

refill instructions for lexmark 23 & 24 I hace a x3550 lexmark and cant seem to find refill instructions for them. Please help Lexmark has an interesting development with their inkjet cartridges which

how to clean rollers on a lexmark 3350 One common cause of paper feed issues is a build up of dust on the printer's rear paper feed roller. This roller consists of a plastic axle with one rubber ...

I have a lexmark x364dn. It has a line through the copies I make. I can print and scan and it is fine. The line is just on copies Assuming the COPY uses a automatic document feeder. The doc feeder ...

machine puts a 1/2 inch black line down the right side of paper being printed Replacing the ink cartridges usually fixes this problem. If there are still lines, try replacing the drum(s). Most drums ...